ElectroVoice TG5

ElectroVoice TG5 – Ultra-High Performance Two-Channel Power Amplifier
Order now: https://cuesale.com/product/electrovoice-tg5/


The TG-5 Tour Grade amplifier has a microprocessor controlled operation management system that provides useful features such as compound thermal management (preventing the unit from switching off in excessive thermal environment), automatic mains voltage detection and a circuit breaker control that allows the TG-5 to operate on a 30A (120V) or 16A (230V) circuit breaker with normal music signals.
The TG-5 uses a grounded bridge 3-step class-H topology to ensure the highest acoustic performance and reliability. The TG Series also offers the power and transient response to drive subwoofers and along with the low distortion for critical HF signals. The high capacity switch-mode power supply provides the headroom needed to ensure high dynamic outputs and reliable operation on extreme low loads.
Optional IRIS-Net™ (Intelligent Remote & Integrated Supervision-Network™ ) Modules available for the TG-5 amplifiers enable state-of-the-art DSP, remote control, networking and unique system supervision – down to an individual loudspeaker component. IRIS-Net™ software is an expandable, open architecture application that operates under Windows™ and supports Ethernet, CobraNet™, CANBus, USB, and RS-232 interfaces. Several modules are available including the: RCM-26 (DSP, AES/EBU input, GPIO, CANBus), RCM-28 (DSP, GPIO, COBRA-Net™) and the RCM-20 (no DSP, CAN-Bus) The modules enable different levels of control and monitoring of the amplifier. The connection of the TG-5 to a PC running IRIS-Net software can be achieved using a UCC-1 USB-CAN interface and/or a N8000 digital matrix.

Key Features:

• Up to 2 x 1900W into 2 Ohms
• Grounded Bridge Class-H Design
• Microprocessor Controlled
• Front LCD-Panel for Operation Mode Set-Up and Monitoring
• Slot for Optional IRIS-NetTM Compatible Control Module
• Complete Protection Package
• Only 14.2 kg (31.4 lbs)
• Designed and Manufactured in Germany

Technical Specifications:

Load impedance :
Max. Midband Output Power THD=1%, 1kHz, Dual Channel : 8 Ohm / 850W ; 4 Ohm / 1450W ; 2 Ohm / 1900W
Max. Rated Output Power THD, 0, 1%, 20Hz…20kHz : 8 Ohm / 600W ; 4 Ohm / 1200W

Input Sensitivity (Rated Power @8 Ohms) : 0 / +6 / +7 dBu (Switchable)
THD at Rated Output Power : <0,05%
IMD-SMPTE (60Hz, 7kHz) : <0,05%
Max. Input Level : +22 dBu (9.75Vrms)
Crosstalk (1kHz, Rated Output Power) : < -80dB Frequency Response (ref. 1kHz) : 10 Hz – 30 kHz (± 1dB) Input Impedance : 20 kOhm Damping Factor (1 kHz) : > 400
Slew Rate : 30V/μs
S/N Ratio (A-weighted, 32dB Gain) : 109 dB
Output Noise, A-weighted : < -70 dBu
Output Stage Topology : Class-H Grounded Bridge
Power Requirements : 100 – 240V, 50/60 Hz or 100V, 50/60 Hz
Power Consumption 1/8 Max. Output @ 4 Ohms : 1000 W
Cooling : Front-to-Rear 5-Stage Fans
Ambient Temperature Limits : +5°C – +40° (40°F – 105°F)


€895,00 Ex V.A.T. (MwST) per piece.

Prices are Excluding 21% VAT / MwSt.

Products are located in The Netherlands, customers with a V.A.T. ID number pay 0% V.A.T. / MwSt
Please send us your full address for a shipment quote / price.

For more used equipment check our other advertisements on this site or have a look at our website www.cuesale.com